 Main Menu |
|
|
 |
||
|
|
|
| Topcon’s GLS-1500 laser scanner leaves nothing behind—except the competition. The operator-friendly design allows for quick and hassle-free setups which saves time and improves productivity. With batteries and data collector on-board, Topcon’s GLS-1500 is lightweight and cable-free. Transportation is a cinch. While other laser scanners take two people to unload, setup, operate, and load, the GLS-1500 is a one-man instrument.
GLS-1500 features also include:
|
|
|
|
|
|
On-board Data Collection The GLS-1500 has an on-board data collector with an LCD display and a 21-key keyboard. This gives the scanner the freedom to function as a stand-alone laser scanner with no connection to a computer |
|
|
Eye-safe and Efficient Use the GLS-1500 anywhere without worrying about damaging the eyes of a passersby. The GLS-1500 uses an invisible, Class 1, eye-safe laser. Scan near airports, busy traffic, and populated areas with no effect to the people or the environment. In addition, the use of a Class 1 invisible laser offers the benefit t of low power consumption. With lower power consumption, the GLS-1000 can operate at longer times with fewer battery changes. |
|
|
Built-in 2.0 Megapixel Digital Camera Reduce the amount of equipment needed in the field with the GLS-1500’s built-in 2.0 megapixel digital camera. Collect sharp and detailed images from the scanning location, or connect to a PC with ScanMaster software, and stream a live video feed of the jobsite to aid in scan setup and data acquisition. |
|
|
|
 |
Small size, big performance This robust scanner sends out a laser beam that captures data at 3,000 points per second at a range of 500 ft. (150m) to a typical surface, and with an extended range to 1100 ft. (330m) for more reflective surfaces. Unique to Topcon’s GLS-1500 is the mechanical ability to select from multiple lens arrays to control the laser beam. This provides consistent 0.16 in. (4mm) accuracy throughout the range from 3 ft. to 500 ft. (1m to 150m). |
|
|
 |
Precise Scan Technology The GLS-1500 integrates pulse-based time of flight and phase-based technologies to achieve industry-leading accuracy and “clean” scan data. The GLS-1500 inherently has:
|
|
|
 |
The GLS-1500 offers wireless LAN (802.11b) and USB 2.0 PC connection. With the GLS-1500’s built-in wireless LAN communication, you can control and collect image and scanning data on a PC from your car. |
|
|
 |
The use of dual axis compensators allows for more accurate instrument setups and scans. Occupy a known coordinate and back sight so traversing within one coordinate system is possible. Compensators can be turned off for tilt able mounts.
|
|
|
 |
The GLS-1500 uses four hot-swappable batteries, two per side. With the lower power consumption of the Class 1 laser, the GLS-1000 can operate for 4 hours doing a continuous scan on one set of batteries at a temperature of 68°F |
|
|
 |
ScanMaster Office Software With ScanMaster’s operator-friendly interface you become more proficient and productive. Manipulate data with ease and quickly deliver a product to your customer.
|
|
|
| SCANNING UNIT | |
|---|---|
|
Maximum range |
|
| 90% reflectivity | 330m |
| 18% reflectivity | 150m |
| Minimum range | 1m |
|
Single point accuracy |
|
| Distance | 4mm at 1 to 150m |
| Angle(H&V) | 6" |
| Target detection accuracy | 3" at 50m (164ft.) |
| Scan rate (maximum) | 30,000 points/second |
|
Scan resolution |
|
| Spot size | <6mm at 1 to 40m |
| Sample density (maximum) | 1mm at 20m |
| Field of view (per scan) | |
| Horizontal | 360° (maximum) |
| Vertical | ±35° (maximum) |
| Laser | |
| Type | Pulsed (time of flight) |
| Wavelength | 1535nm (invisible, eye-safe) |
| Laser class | Class 1 |
|
Digital Camera |
|
| Field of view | Approx. 22° (V) x 16.5° (H) |
| Number of pixels | 2 megapixels |
|
Tilt Compensator |
|
| Type | Dual-axis tilt sensor |
| Compensation range | ±6' |
|
Display |
|
|
Type |
LCD with backlight, 20 characters x 4 lines |
|
Interface |
|
| Memory | SD and SDHC memory cards |
| Wireless LAN | IEEE 802.11b |
| USB | Type mini B Rev. 2.0 |
|
Power Supply |
|
| Removable battery (BT-65Q) | 5Ah, 7.4V |
| Operating time | 4 hours per 4 removable batteries |
| Input voltage | 12V DC |
|
Environmental |
|
| Operating temperature | 0°C to +40°C |
| Storage temperature | -10°C to +60°C |
| Dust and water protection | IP52 (IEC 60529) |
|
Physical |
|
| Dimensions w/handle | 299 (D) x 240 (W) x 566 (H) mm |
| Instrument height | 410mm |
| Weight | 16kg (excluding battery and tribrach) |
